1.25 - 1.50 Spacers

[KennyJoz]

I have been reading and searching some posts about wheel spacers, but unfortunately cant seem to find the ones i read in the past. My set up is 21 Boss with SST kit, 285 -70-18 Grapplers, Stock Wheels, Mud Flap Delete. My question is who has been running either 1.25 or 1.50 spacers with this setup and is there any rubbing or any other issues....? Thank You in Advace

 

[Jmzvet]

I have the same setup but with
295 / 70s and 1.5in spacers. I trimmed the front mudflaps, removed the metal liner bracket, and pulled in the fender liner.
Zero rubbing

 

[GETGONE]

You'll want to go with 1.5" adapters. If you go with 1.25 you'll most likely have to grind down the end of the factory studs to clear the back of the wheel as the stock studs will stick out through the adapters.

 

[TonyBoss]

I’ve got a set of 1.5 KSP hub centric spacers I’ll sell cheap. Also have Readylift 1.75 top and bottom spacers and hardware (no UCAs) if you’re interested.

 

[buckshot85]

Is there clearance to run spacers or shallower offset wheels without a lift?

 

[KennyJoz]

1.250 have p

You'll want to go with 1.5" adapters. If you go with 1.25 you'll most likely have to grind down the end of the factory studs to clear the back of the wheel as the stock studs will stick out through the adapters

There is actually clearance for the studs when running 1.25 spacers with stock TB wheels.

 

[KennyJoz]

I’ve got a set of 1.5 KSP hub centric spacers I’ll sell cheap. Also have Readylift 1.75 top and bottom spacers and hardware (no UCAs) if you’re interested.

Appreciate the reply but the truck already has a Ready Lift SST in it and I ordered BORA spacers....Thanks For Offering tho

 

[GETGONE]

The aftermarket wheels I had on my Avalanche require a 5mm spacer to clear the caliper ridge on my Trail Boss and are -12mm offset already so it's a total of -17mm offset on the factory 2" lift and 275/60/20 tires and they work fine with no issues.

 

[buckshot85]

My TB is bone stock with the 275/60-20s.
Been looking at new Fuel wheels with a +1 offset
Just seems by pushing the wheel out farther would cause it to rub when it swings.