overdriv
New member
- Joined
- Oct 11, 2021
- Messages
- 16
- Media
- 1
- Reaction score
- 2
- Location
- Central IL
- Current Ride
- 2020 Silverado LT Trail Boss
- Current Ride #2
- 2019 Chevy Camaro SS
- Military
- Navy
I installed it four days ago. Mostly works as advertised, but the TPS monitor seems confused.
On startup the task comes up showing the front tires at 31 or32 psi and amber colored.
I hit dismiss a couple of times and goes away, but the tire light stays in alarm on dash.
I checked the tires are all at 35psi, my tires have Nitrogen in them , they never change.
This just started with the install of the Pulsar LT.
The factory set inflate to was 40psi, so
I set it to 35psi, still does the same as above.
Any ideas?
On startup the task comes up showing the front tires at 31 or32 psi and amber colored.
I hit dismiss a couple of times and goes away, but the tire light stays in alarm on dash.
I checked the tires are all at 35psi, my tires have Nitrogen in them , they never change.
This just started with the install of the Pulsar LT.
The factory set inflate to was 40psi, so
I set it to 35psi, still does the same as above.
Any ideas?
