What's new

Anyone else's door speaker grills clogged? This is taking forever to fix!

HopnDude

Member
Joined
Feb 6, 2022
Messages
92
Reaction score
24
Points
8
Location
Home
20220301_231520.jpg
20220301_232637.jpg
 
Thankfully it was only the one door panel. Took about an hour and a half.
 
It was from a bad mould process. About 60% of each hole had plastic from the moulding process left in them. I took a Carb Jet bit/tool at 0.065" and went through them to push/cut the excess plastic out.

If you look at the first photo, you can see the few circles that aren't problematic, but if you look at the other 98% the center looks significantly smaller.

Looking at the second photo, you can see all the holes are now closer in diameter.
 

Most Reactions

Latest Discussions...

Back
Top