What's new

Anyone running Nitto Ridge Grappler 35x12.5xr18 with a leveling kit?

th0mas09

New member
Joined
Oct 31, 2022
Messages
1
Reaction score
0
Points
1
Location
Arizona
Looking to possibly put on 35s and I put the Readylift level kit on my TB. If you have pictures that would be great or rubbing if you had to trim.
 
I have the BDS 4 inch lift kit = to 6 inches running 35-12.50-18 and still get slight rub backing up in reverse with full wheel crank.. I also did the fender delete… you definitely will get rubbing in reverse and most likely in drive with the wheels fully cranked..
 

Attachments

  • B76547F3-7A5B-4C43-B68B-F47869E2DBA6.jpeg
    B76547F3-7A5B-4C43-B68B-F47869E2DBA6.jpeg
    439.1 KB · Views: 117
I can get pictures for you tomorrow with the wheels fully turned to see the distance I have with the BDS lift.. Will help give you an idea of what I’m talking about..
 
I’m also running aftermarket wheels so that plays into the rub too.. I have -12 offset 18X 9.5.. Stock wheels might work with what you are trying to accomplish..
 
I’m also running aftermarket wheels so that plays into the rub too.. I have -12 offset 18X 9.5.. Stock wheels might work with what you are trying to accomplish..
I agree. I have the same lift and aftermarket rims. Good luck!
 

Most Reactions

Back
Top