Baja Kits 2022 Trailboss Duramax

[Rvrslt1]

 

[Chicks406]

Good looking truck. How much lower did it sit with the kit on front? Did you do anything to achieve the height you have?

 

[Rvrslt1]

King coil overs up front that lifted it about an inch. Tires are 315/70R17. Rear also has Kings.
Ride is so much nicer than stock.

 

[Chicks406]

King coil overs up front that lifted it about an inch. Tires are 315/70R17. Rear also has Kings.
Ride is so much nicer than stock.

Did you do full Baja prerunner kit or their UCA? I had a leveling kit on mine and after the UCA/LCA and king install it got lowered about 3”?

I bet. I can’t wait to drive mine and feel the difference

 

[Rvrslt1]

I just did the UCA and the Kings.
Are you saying your truck was lower with your kings installed?

 

[Chicks406]

I just did the UCA and the Kings.
Are you saying your truck was lower with your kings installed?

Yea I’ll send you a pic before and after. The whole kit widens the truck by 6” so I think the width lowers it more. But I contacted PAX power (they build the Chevy jackal) they install a 2” leveling kit on all trucks after the kings and kit.

I also had the ready lift 1.75” leveling kit so I’m comparing to that

 

[Rvrslt1]

Interesting. So the picture of the truck on the ground is how it sits now with the pre runner kit along with the leveling kit? Looks good.

 

[Chicks406]

Interesting. So the picture of the truck on the ground is how it sits now with the pre runner kit along with the leveling kit? Looks good.

Yea I was lost when they sent me the first picture below, that picture is kit, shocks installed. I thought I would get a lift or it would be the same as with just a leveling kit.

No the ground pic is before the kit with just the leveling kit.

The picture on the lift is with the kit, king shocks, and level kit back on, and Deaver springs in the back.

 

[Chicks406]

This is Baja kit with leveling vs. Baja kit alone.

 

[Rvrslt1]

That is crazy.

 

[Chicks406]

Yea for sure. I’ll take measurements and see if I should add more to the front or use a shackle for the rear. I appreciate the info. Can’t wait to drive it. Glad some are getting these kits

 

[Rvrslt1]

Baja Kits is all made in the USA! If anyone is ever in the area of the shop stop in.
Between the Baja Kits operation and the Brenthel Racecars operation it was awesome to see. Building Trophy trucks from ground up. All parts made in house.

 

[BigBlackie_'25TB]

Yea I was lost when they sent me the first picture below, that picture is kit, shocks installed. I thought I would get a lift or it would be the same as with just a leveling kit.

No the ground pic is before the kit with just the leveling kit.

The picture on the lift is with the kit, king shocks, and level kit back on, and Deaver springs in the back.

I am looking for a vehicle lift. Can you find out from the shop in your photo what type of lift that is and where I can find one to purchase? Thanks!

 

[Stormin08]

here are some rough ideas,

19-26 Silverado/Sierra 1500 Mid Travel Kits

We specialize in everything aftermarket for your Vehicle with a focus on Performance Suspension Systems that not only give your vehicle lift but also increase on and off road performance. We only carry the top brands in the industry, so you can be sure you are getting the best products and the...

www.ltwmotorsports.com

then add a deaver leaf or mini pak....

here is a FOX 2.5 set 3.5" with a 1/4" lower spacer on a 35" tire

Same truck, same front set up...but a deaver mini pak, no overload leaf and 1 of the 1/4" deaver spacer...on a 37" tire
( i have since removed the 1/4" rear spacer, it sits far more level...but still a slight rake. i am planning on a 1.5" block and then trying the 1/4" spacer again)

 

[BigBlackie_'25TB]

here are some rough ideas,

19-26 Silverado/Sierra 1500 Mid Travel Kits

We specialize in everything aftermarket for your Vehicle with a focus on Performance Suspension Systems that not only give your vehicle lift but also increase on and off road performance. We only carry the top brands in the industry, so you can be sure you are getting the best products and the...

www.ltwmotorsports.com

then add a deaver leaf or mini pak....

here is a FOX 2.5 set 3.5" with a 1/4" lower spacer on a 35" tire
View attachment 23002

Same truck, same front set up...but a deaver mini pak, no overload leaf and 1 of the 1/4" deaver spacer...on a 37" tire
( i have since removed the 1/4" rear spacer, it sits far more level...but still a slight rake. i am planning on a 1.5" block and then trying the 1/4" spacer again)
View attachment 23003

Stormin08, not sure if you were replying to me. If you were, I was actually asking about the vehicle lift, not a lift kit. I am looking for a decent vehicle lift at an affordable price. I am starting to get sick and tired of using a floor jack and jack stands all the time. I would like to buy a vehicle lift if one is affordable. Thanks.