Just a Trail Boss doing Trail Boss things…

[BMER]

Went to Latrobe rd and Prairie City SVRA up near Folsom, CA with some buddies. Got a little muddy and climbed up a couple obstacles, gonna have fun washing it all off later

Cheers

 

[TIPOVER]

Which A pillar lights are those? They look like Baja Designs, but I've only seen the clear ones on their website not the amber ones.

 

[BMER]

Both my fogs and A pillar lights are from diode dynamics, my fogs are sport level and the pillar lights are pros. Got them on sale for 15% off, the next sale will be on Memorial Day. These are very competitive with Baja designs, the sport level fogs are much brighter than bajas SAE fogs which is why I went with diode. Plus they were half the price, diode dynamics really know what they’re doing.

Search results for: 'stage-series-3-sae-yellow-pro-led-pod-pair'

Automotive LED lighting for cars and trucks, including headlight, fog light, turn signal, backup, tail, interior, halos, demon eyes, boards, strips, and more!

www.diodedynamics.com

SS3 LED Fog Light Kit for 2019-2021 Chevrolet Silverado 1500

Upgrade your fog lights with our SS3 LED Fog Light Kit for 2019-2021 Chevrolet Silverado 1500! Plug and play installation, with no modification needed

www.diodedynamics.com

Cheers!

 

[PistolsFiring]

Are you running any spacers with your setup or is that true poke with tire width and wheel offset? Also, did you use the rear block with the RL 2.0 kit?

I really like the stance!

 

[BMER]

Are you running any spacers with your setup or is that true poke with tire width and wheel offset? Also, did you use the rear block with the RL 2.0 kit?

I really like the stance!

Thanks! Yeah, that’s just the wheels/tires, no spacers. Method 312 17x9 -12 with Mickey Thompson Baja boss A/T 35x12.5. I did use the rear block from the Readylift kit, but I go back and forth if I like it or not since the rake is pretty noticeable.

 

[Jmzvet]

Awesome video! I'm too lazy to do the clean up after so I avoid mud

 

[PistolsFiring]

Thanks! Yeah, that’s just the wheels/tires, no spacers. Method 312 17x9 -12 with Mickey Thompson Baja boss A/T 35x12.5. I did use the rear block from the Readylift kit, but I go back and forth if I like it or not since the rake is pretty noticeable.

At least the shots from today from the corners I don’t think the rake is noticeable. Maybe more so from straight side profile. Either way, good looking truck

 

[BMER]

At least the shots from today from the corners I don’t think the rake is noticeable. Maybe more so from straight side profile. Either way, good looking truck

Yeah doesn’t look too bad from those shots. This side profile shot you can see the rake a lot more, what do you think?

 

[PistolsFiring]

Agree you can see it more. If I had that kit though I think I’d use the rear block. A little extra room before going negative.

 

[PMW_fab]

Great looking truck!

What are those flashing turn signals? Is that something you added aftermarket?

 

[BMER]

Great looking truck!

What are those flashing turn signals? Is that something you added aftermarket?

Thanks! The flashing is unintentional lol probably cause of the videos frame rate. It’s also just the DRL, the pre refresh models (2019-2021) have the turn signal and DRL separated not like the refresh where it is one light.

 

[vezePilot]

The flashing is how LED lights normally work, on nearly all vehicles. They are pulsed, with a less-than-100% Duty Cycle.

It is only due to our eyes & brain that we have "persistence of vision" ... which makes us think the lights are on continuously. They are not.

As Rory/Trail Mater would say ... "... Knowledge and stuff."

 

[TIPOVER]

Both my fogs and A pillar lights are from diode dynamics, my fogs are sport level and the pillar lights are pros. Got them on sale for 15% off, the next sale will be on Memorial Day. These are very competitive with Baja designs, the sport level fogs are much brighter than bajas SAE fogs which is why I went with diode. Plus they were half the price, diode dynamics really know what they’re doing.

Search results for: 'stage-series-3-sae-yellow-pro-led-pod-pair'

Automotive LED lighting for cars and trucks, including headlight, fog light, turn signal, backup, tail, interior, halos, demon eyes, boards, strips, and more!

www.diodedynamics.com

SS3 LED Fog Light Kit for 2019-2021 Chevrolet Silverado 1500

Upgrade your fog lights with our SS3 LED Fog Light Kit for 2019-2021 Chevrolet Silverado 1500! Plug and play installation, with no modification needed

www.diodedynamics.com

Cheers!

Thanks, I'll check out those pod lights. I didn't see a mounting bracket from a quick glance on their site for the A pillar though. Did you use something different to mount them to the truck?

 

[BMER]

Thanks, I'll check out those pod lights. I didn't see a mounting bracket from a quick glance on their site for the A pillar though. Did you use something different to mount them to the truck?

Oh thats right, I forgot to mention I previously had rough country ditch lights that came with a wiring harness and hood mount brackets. I reused everything that came with the rough country lights and spliced/mounted the diode dynamic lights to them. I do not believe diode sells a set of brackets but I am sure you can find some pretty easily on baja designs/RC/amazon etc...

 

[BlackTrailBoss]

Thanks! Yeah, that’s just the wheels/tires, no spacers. Method 312 17x9 -12 with Mickey Thompson Baja boss A/T 35x12.5. I did use the rear block from the Readylift kit, but I go back and forth if I like it or not since the rake is pretty noticeable.

Truck looks great. How much trimming did you need to do to fit those 35s?