What's new

MT tires on stock 20”s

Prometheus

New member
Joined
May 10, 2022
Messages
7
Reaction score
6
Points
3
Location
Boise, Idaho
Hey guys, new member here. I currently have a 2020 RST but recently put an order in for a 2022 LT Trail Boss with a 6.2! I ordered with the 20” wheels but I am looking get 37” tires once I get the truck. I want to keep the wheels, going to do a level day one and can/will add spacers to give it a little more stance (nothing crazy). Does anyone know if I can fit 37s with a level and 20” wheels? If a lift is required for 37s, how much? 2 inch, 4 inch? I’m not wanting to lift it too much, just enough for clearance with some plastic trimming maybe. I’d like to stay at a 2-3 inch but if 4 or more is necessary I may have to look in to 18 wheels instead
 

Attachments

  • D19E33D4-958E-4FB5-B8AE-2D8005332525.jpeg
    D19E33D4-958E-4FB5-B8AE-2D8005332525.jpeg
    104 KB · Views: 3

tommysf13

Member
Joined
Jun 19, 2021
Messages
91
Reaction score
55
Points
18
Location
central WA
Hey guys, new member here. I currently have a 2020 RST but recently put an order in for a 2022 LT Trail Boss with a 6.2! I ordered with the 20” wheels but I am looking get 37” tires once I get the truck. I want to keep the wheels, going to do a level day one and can/will add spacers to give it a little more stance (nothing crazy). Does anyone know if I can fit 37s with a level and 20” wheels? If a lift is required for 37s, how much? 2 inch, 4 inch? I’m not wanting to lift it too much, just enough for clearance with some plastic trimming maybe. I’d like to stay at a 2-3 inch but if 4 or more is necessary I may have to look in to 18 wheels instead
I have a 19 TB Custom. I put 35x12.5x20s on with a RC 1.5 leveling but had to trim almost 2/3 of the front flap. The flaps are still mounted by the 3 factory screws. I do get some rub at full turn but it's worth it to me.
 

2KWIK2C

Member
Joined
Dec 8, 2021
Messages
33
Reaction score
14
Points
8
Location
WI
37" tires will be tough. I have a 6" BDS lift kit and with 35" wheels on 18" rims there is approximately 1/2" between inner fender well with no trimming on full turn. I was going to go to 37" and decided that my 35" are good enough. Prefer not to trim being in Wisconsin.
 
OP
OP
P

Prometheus

New member
Joined
May 10, 2022
Messages
7
Reaction score
6
Points
3
Location
Boise, Idaho
I might have to go with 18” wheels and 35” tires. I like the look of more sidewall and I don’t want to lift it too much
 

tommysf13

Member
Joined
Jun 19, 2021
Messages
91
Reaction score
55
Points
18
Location
central WA
I might have to go with 18” wheels and 35” tires. I like the look of more sidewall and I don’t want to lift it too much
I went from 18 to 20” on 35s. !
I might have to go with 18” wheels and 35” tires. I like the look of more sidewall and I don’t want to lift it too much
I found these close copy wheels in 20" for less than Chevy wheels.
 

Attachments

  • 20 imitation.JPG
    20 imitation.JPG
    475.5 KB · Views: 24
  • IMG_4029 - Copy.JPG
    IMG_4029 - Copy.JPG
    433.9 KB · Views: 23
  • IMG_6557 - editlic - Copy.jpg
    IMG_6557 - editlic - Copy.jpg
    369.4 KB · Views: 24
Top