What's new

MY 37's FIT!!!

krazyk21

New member
Joined
Sep 23, 2023
Messages
22
Reaction score
19
Points
3
Location
illinois
I will definitely get better pictures after work. It was dark last night. But falken wlidpeak a/t 37x12.5x18 fit my trail boss with a 6inch RC lift, 2inch wheel spacers, and stock wheels.

I have not removed anything yet.

Tires rub mud flaps going backwards turning all the way to stops. I will be taking mud flaps off.

They barley clear the front bumper but the front of the tire does not rub on anything.

I will be cutting some of the bottom part of bumper. just to re insure myself it won't hit.

Driving normal, it never rubbed.

I feel some weight off the line but nothing that seems to be worrying. Sport mode helps with this. I also have the pulsar lt programmer. Throttle response is set to 4.
 

Attachments

  • 20240104_170106.jpg
    20240104_170106.jpg
    366 KB · Views: 207
  • 20240104_170056.jpg
    20240104_170056.jpg
    396.8 KB · Views: 191
  • 20231222_143258.jpg
    20231222_143258.jpg
    209.9 KB · Views: 191
Like it. I have a six inch and 1.5" wheel spacers on 18's. I was going to go with 37's. However with no rubbing at all with 35's I decided to stay with true 35's. If they made a decent 36" tire I probably would have went with those with the extra 0.5" a side. I'll consider it next time.
 
Like it. I have a six inch and 1.5" wheel spacers on 18's. I was going to go with 37's. However with no rubbing at all with 35's I decided to stay with true 35's. If they made a decent 36" tire I probably would have went with those with the extra 0.5" a side. I'll consider it next time.
I believe spec says it's actually a 36.6 but I'm still happy with them. 😆
 
I tend to swap tires at 10K miles or less so could be before hunting season in the fall. I will definitely consider them seeing they would probably only rub full turn.
 
I will definitely get better pictures after work. It was dark last night. But falken wlidpeak a/t 37x12.5x18 fit my trail boss with a 6inch RC lift, 2inch wheel spacers, and stock wheels.

I have not removed anything yet.

Tires rub mud flaps going backwards turning all the way to stops. I will be taking mud flaps off.

They barley clear the front bumper but the front of the tire does not rub on anything.

I will be cutting some of the bottom part of bumper. just to re insure myself it won't hit.

Driving normal, it never rubbed.

I feel some weight off the line but nothing that seems to be worrying. Sport mode helps with this. I also have the pulsar lt programmer. Throttle response is set to 4.
Looks way better than the itty bitty stocks before!
 
I will definitely get better pictures after work. It was dark last night. But falken wlidpeak a/t 37x12.5x18 fit my trail boss with a 6inch RC lift, 2inch wheel spacers, and stock wheels.

I have not removed anything yet.

Tires rub mud flaps going backwards turning all the way to stops. I will be taking mud flaps off.

They barley clear the front bumper but the front of the tire does not rub on anything.

I will be cutting some of the bottom part of bumper. just to re insure myself it won't hit.

Driving normal, it never rubbed.

I feel some weight off the line but nothing that seems to be worrying. Sport mode helps with this. I also have the pulsar lt programmer. Throttle response is set to 4.
Nice … maybe once my 35’s need replacing I would consider 37’s , just a sweet look … maybe a regear to save tranny….. congrats looks badass bro… mine is very daily driven so wanted a low center of gravity with larger tires and 35’s works …
 
I suck at pictures but here you go. I needed to remove the mudguard bracket (4 bolts) and zip tie the liner back. I'll figure out something cleaner later. I had to cut the front liner a little. I get no rub on full turn to stops.
 

Attachments

  • 20240107_111105.jpg
    20240107_111105.jpg
    753.2 KB · Views: 75
  • 20240107_111040.jpg
    20240107_111040.jpg
    694.7 KB · Views: 72
  • 20240107_110947.jpg
    20240107_110947.jpg
    377.7 KB · Views: 71
  • 20240107_110935.jpg
    20240107_110935.jpg
    209.8 KB · Views: 68
  • 20240107_110858.jpg
    20240107_110858.jpg
    298.1 KB · Views: 69
  • 20240107_110819.jpg
    20240107_110819.jpg
    215.1 KB · Views: 68
  • 20240107_103052.jpg
    20240107_103052.jpg
    261.5 KB · Views: 68
  • 20240107_103031.jpg
    20240107_103031.jpg
    470 KB · Views: 69
  • 20240107_111141.jpg
    20240107_111141.jpg
    696.3 KB · Views: 72
I think I'm going to cut my mudguard to be able to mount just the piece that sticks on the side. I need that color back up front. lol
 
I suck at pictures but here you go. I needed to remove the mudguard bracket (4 bolts) and zip tie the liner back. I'll figure out something cleaner later. I had to cut the front liner a little. I get no rub on full turn to stops.
Sweet , what your lift again … factory wheels so your running spacers …
 
I suck at pictures but here you go. I needed to remove the mudguard bracket (4 bolts) and zip tie the liner back. I'll figure out something cleaner later. I had to cut the front liner a little. I get no rub on full turn to stops.
it looks better without the color...but i digress

when i pulled my liners, i used thin strips of sheet metal to make brackets mounted off the bumper bolts. drilled them and used factory style push tress to hold the liners.
 

Most Reactions

Back
Top