What's new

replacing wood grain door trim

wesg79

Member
Joined
Sep 5, 2021
Messages
35
Reaction score
48
Points
18
Location
Ontario Canada
Cannot for the life of me figure out why GM wtill puts this awful looking orange fake woog rain on their interiors but it had to go

CA82-F2-DD-BF3-E-4914-B281-DC28282-ADCF5.jpg
5-ADBFD10-A137-4-C05-BFCB-FEAED2127248.jpg
DA67-E854-F8-F1-4-F5-E-AC09-AE8-C30-F1-F004.jpg
 
Agreed,

I did the same thing. Looks so much better
looks great where did you get it, id love to swap those out. oddly enough when i bought the truck that was the 1 thing i asked the salesmen. Why on a truck where Everything outside is cherry tint red and black and everything inside is grey and black would they put that on it.
 
looks great where did you get it, id love to swap those out. oddly enough when i bought the truck that was the 1 thing i asked the salesmen. Why on a truck where Everything outside is cherry tint red and black and everything inside is grey and black would they put that on it.
Gmauthorty sells them on eBay, you should be and to find them on the gm accessories pages to
 
Cannot for the life of me figure out why GM wtill puts this awful looking orange fake woog rain on their interiors but it had to go

CA82-F2-DD-BF3-E-4914-B281-DC28282-ADCF5.jpg
5-ADBFD10-A137-4-C05-BFCB-FEAED2127248.jpg
DA67-E854-F8-F1-4-F5-E-AC09-AE8-C30-F1-F004.jpg
Yeah I never figured that out either. It might be okay for the LTZ or High Country but definitely don’t see why in the TB with it already having so much black anyways. The black trim looks so much better! Doing this soon as well.
 
Looks like they could easily be “wrapped” in any finish you like?
 
$5 and 2hrs of my time.
Who said old white guys can’t wrap🤣
 

Attachments

  • 85123F0C-5EEA-475E-9969-B1BC9969B917.jpeg
    85123F0C-5EEA-475E-9969-B1BC9969B917.jpeg
    280.6 KB · Views: 217
  • 34DCA141-89CB-4A3E-B2C7-8C7B6C7E6B54.jpeg
    34DCA141-89CB-4A3E-B2C7-8C7B6C7E6B54.jpeg
    581.2 KB · Views: 225
  • 5B9DFE0E-97F5-49FE-BD81-F4DAE9023096.jpeg
    5B9DFE0E-97F5-49FE-BD81-F4DAE9023096.jpeg
    718.5 KB · Views: 223
  • 5B82BD33-7701-48EF-B35A-65A8C230467C.jpeg
    5B82BD33-7701-48EF-B35A-65A8C230467C.jpeg
    290.5 KB · Views: 211
  • A27F0F41-B482-4407-93E3-89D0C9BAAED9.jpeg
    A27F0F41-B482-4407-93E3-89D0C9BAAED9.jpeg
    372 KB · Views: 207
VViViD Black True R Carbon Fiber Vinyl Wrap Roll with Air Release Technology
1ftx5ft is $10. I used about half.
https://www.amazon.com/dp/B00FXYG1V...abc_ST89BD0JPJJQYMNQ4NRW?_encoding=UTF8&psc=1
First attempt at wrapping anything. Wasn’t difficult at all. The material is cheap and hard to mess up. I just wiped the parts surface with alcohol, applied the wrap, smoothed it out, trimmed it, then applied some heat from a heatgun to shrink it a bit and tighten it up👍
 
Last edited:
VViViD Black True R Carbon Fiber Vinyl Wrap Roll with Air Release Technology
1ftx5ft is $10. I used about half.
https://www.amazon.com/dp/B00FXYG1V...abc_ST89BD0JPJJQYMNQ4NRW?_encoding=UTF8&psc=1
First attempt at wrapping anything. Wasn’t difficult at all. The material is cheap and hard to mess up. I just wiped the parts surface with alcohol, applied the wrap, smoothed it out, trimmed it, then applied some heat from a heatgun to shrink it a bit and tighten it up👍
Wrapped mine last night. Too easy.
 

Most Reactions

Back
Top