Ride height and rims

[Ryanj5049]

Hey, all.
So who runs JUST a 1.75' level kit with larger tires?
What size tires (34" or 35") are you running and what rim offset WITHOUT any rubbing?

I'm getting 34" tires on -12 rims installed and don't expect any rubbing from what i've seen on here.
Just nervous now it's getting done and need some reassuring confirmation!

Have a good one, TB'ers.

 

[PMW_fab]

I have the 1.75 Readlift Level Kit with 22 x 10 Fuel wheels with -18 offset. Tires are OC AT3 285/55R22.

I had to tuck the inner fenders front and back, and put a mudflap delete kit on for them not to rub at full turn.

 

[Ryanj5049]

I have the 1.75 Readlift Level Kit with 22 x 10 Fuel wheels with -18 offset. Tires are OC AT3 285/55R22.

I had to tuck the inner fenders front and back, and put a mudflap delete kit on for them not to rub at full turn.

You basically zip tie those liners??

 

[PMW_fab]

No, I pushed them back and drilled a small hole into the frame. I also removed the bracket that holds the mudflap in place, which is basically useless once you do the mudflap delete. Used a plastic push pin to get it back as far as I could get it, didn't want the ziptie look.