Spacer size for stock wheels

[HammerBoss]

I added 35 x 11.5 x 20 Nitto Ridge Grapplers on the stock wheels. The fit is perfect however I would like to them come out a bit. Anyone running a similar setup with wheel spacers? What thickness?

 

[Baz]

I added 35 x 11.5 x 20 Nitto Ridge Grapplers on the stock wheels. The fit is perfect however I would like to them come out a bit. Anyone running a similar setup with wheel spacers? What thickness?

I’m running 295/70r18 on stock 18s which is about the same size overall. I’ve got custom fit 1.5in BORA wheel spacers that give the truck a good stance. Keep in mind the wheel studs are 1.75in long, so the only reason my spacers fit is because the stock 18s have pockets on the back of the wheel. I’ll post some pics for a visual. I’ve seen pics of 1.5-2in wheel spacers, and they all look good to me. You’re going to have to trim the mud flaps and maybe remove the liner brackets if you’re stock Trail Boss height like mine.

 

[Jmzvet]

I have the same setup as Baz but also a ReadyLift 2” level kit. Still had had to remove the metal bracket and trim the mudflap to prevent rubbing.

 

[HammerBoss]

I’m running 295/70r18 on stock 18s which is about the same size overall. I’ve got custom fit 1.5in BORA wheel spacers that give the truck a good stance. Keep in mind the wheel studs are 1.75in long, so the only reason my spacers fit is because the stock 18s have pockets on the back of the wheel. I’ll post some pics for a visual. I’ve seen pics of 1.5-2in wheel spacers, and they all look good to me. You’re going to have to trim the mud flaps and maybe remove the liner brackets if you’re stock Trail Boss height like mine.

I have no rubbing now without additional lift. Are you saying that adding the spacers will cause the rubbing?

 

[Jmzvet]

I have no rubbing now without additional lift. Are you saying that adding the spacers will cause the rubbing?

Yes. When turning full lock

 

[HammerBoss]

Yes. When turning full lock

Ok that’s good info thanks

 

[Fishing 911]

I’m running 295/70r18 on stock 18s which is about the same size overall. I’ve got custom fit 1.5in BORA wheel spacers that give the truck a good stance. Keep in mind the wheel studs are 1.75in long, so the only reason my spacers fit is because the stock 18s have pockets on the back of the wheel. I’ll post some pics for a visual. I’ve seen pics of 1.5-2in wheel spacers, and they all look good to me. You’re going to have to trim the mud flaps and maybe remove the liner brackets if you’re stock Trail Boss height like mine.

 

[Fishing 911]

Nice looking truck

 

[Meade42]

I added 35 x 11.5 x 20 Nitto Ridge Grapplers on the stock wheels. The fit is perfect however I would like to them come out a bit. Anyone running a similar setup with wheel spacers? What thickness?

I’m looking to upgrade tires also. I have the 20” wheels. Currently riding on duratrak 33s. Didn’t think I could get 35s to fit. Definitely gonna try now tho. I also have 2” spacers and just ordered zone off road UCAs and Bilstein 6112 shocks.