Tire size.

Meade42 · Oct 13, 2022

I know this is a dumb question but can I fit 33x12.5 on my stock rims. I have the 20” rims so I believe they are 9 wide. Currently running the duratrak 275 60r20 with 2” spacers Thinking of changing to Gladiator 33, 12.5 20.

Again apologize for stupid question but wanna double check. Custom offset say yes but all tire shops by me say no

GETGONE · Oct 13, 2022

Your tire is already a 33" tire. It will be a bit wider. You have spacers so that should eliminate any upper control arm clearance issues. At worst you might get some rubbing at the back where the mudflap and bracket behind it are. Most everybody removes the bracket and trims the mudflap to clear.

Meade42 · Oct 14, 2022

GETGONE said:
Your tire is already a 33" tire. It will be a bit wider. You have spacers so that should eliminate any upper control arm clearance issues. At worst you might get some rubbing at the back where the mudflap and bracket behind it are. Most everybody removes the bracket and trims the mudflap to clear.

Thanks for the info. But upon more research I think I’m gonna hold off and order some 17x10 rims with -18 offset and some 35x12.50 tires

GETGONE · Oct 14, 2022

Where did you find 17x10s? I have a set of 17x9 -25 with 35x10.50 tires. I also have a set of 17x8 -10 with 315/70/17 as well. I need to get the tires mounted and the 2" front and 1" rear lift put on.

Meade42 · Oct 15, 2022

Custom offsets! My ready lift is suppose to arrive today then I’m gonna drop off Monday for install. Think I’m just gonna tun my 20” through winter. But I was told at tire store with the 4” lift and 2” spacers I could probably fit 35” with minor trimming. I already have a slight rub at full tilt in reverse. Just haven’t had time to do any trimming yet