What did you do to your Trailboss today? šŸ› ļø

Coyote Wheel Accessories. They sell the normal ET lugs for the aftermarket wheels, and these specifically for factory wheels and spacers. SKU: 15K648 is the part number for these particular lugs.

Thanks. I found them on Amazon and will have them Sunday.

Where did you order the spacer from? I would like to get 2 more for the rear.
 
No problem. I ordered the spacers from Scovel Motorsports. They had the Bora spacers in stock. Very fast shipping considering theyā€™re in California. I believe itā€™s a bit of a lead time if you order direct from Motorsport Tech. Let me know if you do the rear. Iā€™m considering the same now that I have the lug nuts.
 
Tell us about your modifications, upgrades, repairs and customizations!
Today I was lazy. I redeemed 109,695 GM Credit Card points šŸ˜† and had my local dealership install my Powerstop Sport brakes and flush out my brakes. Nothing beats free!
IMG_1888.jpeg
IMG_1889.jpeg
 
Installed the Denali gauge cluster, new steering wheel and harness to my TB Custom and now have a sweet looking cluster and fully functioning steering wheel with all controls! Much needed upgrade!

Now just to figure out how I can get the heated steering portion to work. Maybe find the wire in the harness and hook it up to a 12v source?...
could you guide me to a install vid for the harness for radio, trouble finding one. I just replaced my wheel on my 19 custom. thanks
 
I did an oil change with Mobil 1 and GM filter. Took longer than expected because oil filter wouldn't come off.

Also install a bigger spacer under my DSSV struts. Now I am perfectly level front to back.

And reinstall front Bora .375 spacers. Tires are way too close to my Cognito UCA.
 
I rotated my tires. 295-70s are heavyšŸ˜. Im almost 60 and probably should get it done at a tire shop.
I just donā€™t trust anywhere to treat my vehicles like I došŸ˜¬
Same here. I watched the GM tech like a hawk while he put my new brakes in. Itā€™s also a KIA dealership and one of their techs put gasoline in the oil fill. How this is even possible, I have no idea. Mustā€™ve been someoneā€™s first day. He only realized this after the woman was about to pull out. She said o thatā€™s ok and they corrected the error. She obviously didnā€™t know the severity of the situation. I would have gotten a new truck or crate engine at the very least. šŸ˜‚
 
Last edited:
Installed the Denali gauge cluster, new steering wheel and harness to my TB Custom and now have a sweet looking cluster and fully functioning steering wheel with all controls! Much needed upgrade!

Now just to figure out how I can get the heated steering portion to work. Maybe find the wire in the harness and hook it up to a 12v source?...
NM my previous message, found a video with the single wire install
 
Same here. I watched the GM tech like a hawk while he put my new brakes in. Itā€™s also a KIA dealership and one of their techs put gasoline in the oil fill. How this is even possible, I have no idea. Mustā€™ve been someoneā€™s first day. He only realized this after the woman was about to pull out. She said o thatā€™s ok and they corrected the error. She obviously didnā€™t know the severity of the situation. I would have gotten a new truck or crate engine at the very least. šŸ˜‚
Are you serious? You saw someone pour gasoline into the oil fill in the engine compartment??
 
could you guide me to a install vid for the harness for radio, trouble finding one. I just replaced my wheel on my 19 custom. thanks
Are you referring to the Harness Dr harness for the steering wheel controls? If so he has a work instruction on his website.
 
I hope your eyes are better than mine. That wire is a lot smaller in person. But itā€™s definitely worth it once completed.
 
Are you referring to the Harness Dr harness for the steering wheel controls? If so he has a work instruction on his website.
yes. I did find another online finally that was very well done and up close. on the Drs site I did'nt scroll down far enough. thank you
 
Canā€™t be more happy with the new suspension. 1.20ā€ lift up front to flatten out. Tires/wheels being delivered by the end of the weekend.

Method MR318 18x9 with 0 offset in bronze. And 295/70 KO2ā€™s.
 

Attachments

  • IMG_8793.jpeg
    IMG_8793.jpeg
    301 KB · Views: 29
Are you serious? You saw someone pour gasoline into the oil fill in the engine compartment??
No I didnā€™t see it actually happen. I wish I did because Iā€™d love to know how itā€™s even possible lol. I watched the tech run after the woman. They caught up with her before she left the lot. Thereā€™s a firewall between the GM and Kia service areas.
 
Didnā€™t do much to the trucks this weekend. Gave it a good washee washee and ordered an oil change from Amsoil, used the coupon code FREERAGS for a free Amsoil funnel and a couple of shop rags.
 

Attachments

  • IMG_1949.jpeg
    IMG_1949.jpeg
    549.1 KB · Views: 23
Back
Top