What's new

What did you do to your Trailboss today? 🛠️

I was able to fit the team RXP duo oil catch can in the truck.

I was not drilling a hole in my throttle body, but I improvised a little and was able to get it worked out. No lights and normal oil pressure. Just gotta get some red zip ties to bring it all together.

I included a picture of the mount set up.
 

Attachments

  • 3013288A-96C0-4ED1-9C85-B4C5319A42DF.jpeg
    3013288A-96C0-4ED1-9C85-B4C5319A42DF.jpeg
    405.3 KB · Views: 353
  • 001DEE24-0CA2-400E-B359-8B5ED7A8E303.jpeg
    001DEE24-0CA2-400E-B359-8B5ED7A8E303.jpeg
    509.9 KB · Views: 350
Over time it will peel off. I have Plastidiped lots of things. Looks good for a while but eventually comes off especially in a car wash. I would highly recommend just getting new black emblems.
Thank you for the quick reply. I will be on the look out for quality emblems.
 
IMG_1610.jpeg


IMG_1611.jpeg
IMG_1655.jpeg

IMG_1656.jpeg

63105812614__DB32AE7A-5494-48B8-BA20-D3B043813C7F.jpeg
IMG_1663.jpeg

Sent my exhaust tips to get powder coated gloss black at a local refinishing shop ($75.00 for tips and clips). It took a few days but well worth the wait. I used the hose as a guide on my compressed air ratchet to remove the hard to get to screw so I didn't have to remove the corner steps.
 
Just a few mods so far, window tint, Ronan bullet antenna, factory bed trifold cover (marketplace find), and my favorite black American front tag
 

Attachments

  • 335025AA-AE75-42E8-B9AC-CC5A76088FB5.jpeg
    335025AA-AE75-42E8-B9AC-CC5A76088FB5.jpeg
    354 KB · Views: 179
  • 2D13B292-A5E3-4898-9035-EABAC7F4EBA6.jpeg
    2D13B292-A5E3-4898-9035-EABAC7F4EBA6.jpeg
    453.7 KB · Views: 181
  • 6AB82FE8-5383-4FCE-9816-B7F87FBA8DE4.jpeg
    6AB82FE8-5383-4FCE-9816-B7F87FBA8DE4.jpeg
    420.3 KB · Views: 177
  • ED59B989-0CC9-4DF8-8932-D61A1DA4582D.jpeg
    ED59B989-0CC9-4DF8-8932-D61A1DA4582D.jpeg
    461.4 KB · Views: 167
Simple wash job, i was lazy because its cold and drove to a drive thru car wash...
 
Tell us about your modifications, upgrades, repairs and customizations!
So far I’ve done the Trail Boss stickers, Westin running boards, Weathertech mud flaps and auto stop eliminator
BF9C0B1C-91EE-4938-83A8-164273767D44.jpeg
F7901775-E2E7-488A-9235-6B1246F9B78A.jpeg
 
Tyger Auto steps. Spray in Bedliner and a Retrax Pro Tonneau cover.
 
Oil change and tire rotation by the dealer. Over $77 worth....... i wont be going back for that again. I know i can do it for a lot less myself.
 
New owner and new member here. This is what i got: Black on black 2021 6.2 10 speed tranny. I have added Cold Air Inductions intake, Borla Touring catback exhaust, Wesdon black double wall exhaust tips, black chrome lug nuts and tinted front wondows. Soon to be adding Pulsar LT control module that allows you to deactivate DFM, change speed limiter, adjust throttle response and a few other things. Its a start.
 

Attachments

  • 052F0797-67A0-4C2C-A50A-210F777BED7F.jpeg
    052F0797-67A0-4C2C-A50A-210F777BED7F.jpeg
    331.2 KB · Views: 435
  • 3CFCBB32-BC91-4BF5-A621-773B16D0D082.jpeg
    3CFCBB32-BC91-4BF5-A621-773B16D0D082.jpeg
    351.4 KB · Views: 433
  • F1B7C89D-084B-47F0-92F0-78D595A53719.jpeg
    F1B7C89D-084B-47F0-92F0-78D595A53719.jpeg
    219.2 KB · Views: 435
  • 0737A987-D0EB-4D9F-BD56-F98A417C53E2.jpeg
    0737A987-D0EB-4D9F-BD56-F98A417C53E2.jpeg
    300.6 KB · Views: 428
  • AA8A2C70-8607-4886-A963-E3C60B677D56.jpeg
    AA8A2C70-8607-4886-A963-E3C60B677D56.jpeg
    260.7 KB · Views: 453
New owner and new member here. This is what i got: Black on black 2021 6.2 10 speed tranny. I have added Cold Air Inductions intake, Borla Touring catback exhaust, Wesdon black double wall exhaust tips, black chrome lug nuts and tinted front wondows. Soon to be adding Pulsar LT control module that allows you to deactivate DFM, change speed limiter, adjust throttle response and a few other things. Its a start.
Any issues with the install of that LT device? I read on another forum where someone had commented that the connector didn't fit correctly. I'm on the fence about one, like the Speed Limiter adjustment and DFM disabler, just concerned as I heard a few reported glitches too.

I already have Auto-Stop installed and it works great!
 
It should arrive tomorrow so will let you let you know. I too am worried about glitches and fitment but like i said with American Trucks willing refund within 30 days its worth the risk to me. They claim that they have tested with no issues so we will see.
 

Most Reactions

Back
Top