35s

jeremynich31

New member
Joined
Apr 3, 2026
Messages
5
Reaction score
2
Location
Alabama
Current Ride
2021 LT Trail boss 6.2
I’m about to go with 35x12.5/20 on factory wheels, will I have to run a spacer to make them fit? I have a 21 LT w/ 6.2. I do have a 2in level on it. Thanks in advance
 
I’m about to go with 35x12.5/20 on factory wheels, will I have to run a spacer to make them fit? I have a 21 LT w/ 6.2. I do have a 2in level on it. Thanks in advance
Following. I used Bilstein's leveling shocks which aren't a true level for the Trail Boss trim. It only brough the nose of my truck up about 1.1 inches. But I am due for some new tires and also curious if 35's will fit.
 
Lot to keep in mind here. "Fit" means different things if you are getting groceries or off-roading at full articulation. Different tires of varying models and manufacturers will have slightly different actual dimensions. There was also a slight modification to the wheel well geometry between a '21 and the mid-gen refresh.

If I was betting, I'd say you would have to go with spacers, and then with those, would need some trimming as well.

https://www.duramaxnews.com/post/tallest-tire-on-a-stock-silverado-1500-zr2-no-mods-fitment-guide may be of use as well.

Good luck!
 
I am running 35X12.5X20s on the stock rims. I have a BDS 4 inch lift and I had to go with 1.5 spacers to clear.
 

Attachments

  • D59C151B-5EEC-499C-B5C4-A4D5DC6C7D0B_1_105_c.webp
    D59C151B-5EEC-499C-B5C4-A4D5DC6C7D0B_1_105_c.webp
    259 KB · Views: 1

Latest Discussions...

Back
Top