Lift questions

[dan88]

Hi all. I am new here so I apologize if this post is not in the correct location.
My 2020 Silverado Trailboss 6.2L is currently stock, in terms of wheels, tires, suspension. I am looking to go up to 34 or 35 inch tires and a 3-4 inch lift. I have a few questions.
1. Any recommendations on a 4-inch lift that does not require cutting frame components?
2. For all lifts, does the height of the lift add to the 2" factory lift or does it remove the factory lift? In other words, is a 4 inch lift just 2 inches taller than a stock trailboss?
3. Anyone have photos of their own trailbosses with 34 or 35 inch tires and a lift?

 

[Stormin08]

Most lifts that use a cradle drop will require cutting that portion of the frame.

you can get up to 4" TOTAL, by way of a leveling kit, and it has ample room for a 35 on the correct offset wheel.

lift dependent, the 4" can be on top of the factory lift netting a total of 6" and the 35 will look small. (My Opinion)

here are a few on mine...
this is a Ready Lift 1.75" level on a 34" tire

same truck, with a 35

this was a swap tp the Fox 2.5 Elites set at 3.75" with a 1/4" lower spacer....maybe totaling 4.25"

Here it is, same FOX set up...on a 37" tire (still about 4.25" total lift.

and again, with the 35...just to show size next to the Leveled 3500 on a 35" ish tire

 

[dan88]

Awesome! They look great. On the Fox 2.5, did you keep the readylift levelling kit?