The black Trail boss Photo Thread

[Keller]

I posted this on another thread. I went with Plasti Dip on my center grill bow tie and my center caps. Worked great and an easy project. I have tried the door button yet, not sure how that will turn out.

Let me know how the plasti dip works out. Plasti dip wouldn't last a year up here with the salt they use on the roads. The factory paint on the front of my truck after 1.5 Canadian winters already looks like it's been hit by a few rounds of birdshot.

 

[Stormin08]

I posted this on another thread. I went with Plasti Dip on my center grill bow tie and my center caps. Worked great and an easy project. I have tried the door button yet, not sure how that will turn out.

i plan to wrap mine in vinyl, it will outlive the daily use of Plastidip

 

[OffWhtTB]

i plan to wrap mine in vinyl, it will outlive the daily use of Plastidip

I tried vinyl first. I couldn’t get the inside corners on the bow tie to lay flat and not show any chrome. I hope it works better for you and/or you have better luck. I am happy with the Plasti Dip for now and it’s cheap and easy to reapply.

 

[OffWhtTB]

Let me know how the plasti dip works out. Plasti dip wouldn't last a year up here with the salt they use on the roads. The factory paint on the front of my truck after 1.5 Canadian winters already looks like it's been hit by a few rounds of birdshot.

I live in the Midwest of the US and we haven’t had a real winter in a couple of years.

 

[Stormin08]

i was referring to the DOOR BUTTONS, i would paint or swap the bowties out.
my 17 suburban got the AMI billet bowties...need to make that for these trucks. tis truck may get the Zr2 flow tie soon,.

 

[OffWhtTB]

Anyone found good quality black lug nuts. Deez Nutz, the chrome ones, have got to go. The reviews on most black lug nuts say the paint comes off very easily.

 

[TBCooper]

Anyone found good quality black lug nuts. Deez Nutz, the chrome ones, have got to go. The reviews on most black lug nuts say the paint comes off very easily.

Yup I got rid of doze nutz
Set of 24 Veritek 14x1.5mm OEM... https://www.amazon.com/dp/B07MBXWXSB?ref=ppx_pop_mob_ap_share

 

[TBCooper]

Yup I got rid of doze nutz
Set of 24 Veritek 14x1.5mm OEM... https://www.amazon.com/dp/B07MBXWXSB?ref=ppx_pop_mob_ap_share

Also bought this and torqued em proper so the paint didn't get fd up
TITAN 21094 1/2-Inch Drive x 22mm... https://www.amazon.com/dp/B008XN7SM4?ref=ppx_pop_mob_ap_share

 

[Fiveoh]

2020 Custom Trailboss with 5.3. I’ve had it almost two years. Mods…let see: tint, shorty antenna, Gator EFX tonneau cover, N-Fab RKR rail step system, new emblems, fog lights, rear wheel liners, Readylift 1.75 level, Katzkin leather, new steering wheel and cluster from WAMS, and Putco Blade. Sea light leds are on order. Only future addition will be bigger tires when these need to be replaced.

 

[JWright82]

2020 Custom Trailboss with 5.3. I’ve had it almost two years. Mods…let see: tint, shorty antenna, Gator EFX tonneau cover, N-Fab RKR rail step system, new emblems, fog lights, rear wheel liners, Readylift 1.75 level, Katzkin leather, new steering wheel and cluster from WAMS, and Putco Blade. Sea light leds are on order. Only future addition will be bigger tires when these need to be replaced.

Looks phenomenal! What can you tell us about your process for detailing? Black is tough, man, and that finish looks top notch.

 

[Fiveoh]

It is a weekend only truck, so it stays in the garage all week. That helps keep it clean. Detailing is a hobby, and I’m always trying new products. I recently did a light paint correction on it using Chemical Guys products. I was worried because it left the paint with a cloudy appearance. Yesterday I used a one step by 3D, and it came out nicely. As far as a maintenance wash, I use a foam cannon and electric power washer. I’m really liking Adam’s for my soap. Also a big fan of their graphene tire dressing. Yes, it’s a pavement princess, and I’m perfectly fine with that.

 

[Fiveoh]

My little detailing arsenal.

 

[Stormin08]

Just adding for future searches... 22x10 -18 w/ 285-55-22 on a RL 1.75" level

Some AngelWax love after the paint correction

Going a new direction...KMC Grenande 20x9 0 offset w/ 35 x 11.50

 

[Ronb0828]

added the fuel 20x9 tactics in anthracite. Gives it a nice stance. Just enough to muddy up the sides every time you hit a puddle. Adding my topper soon.

View attachment 38View attachment 39

added the fuel 20x9 tactics in anthracite. Gives it a nice stance. Just enough to muddy up the sides every time you hit a puddle. Adding my topper soon.

View attachment 38View attachment 39View attachment 40

How you like the longer bed vs the shorter one . I just bought 2024 tb with the longer bed trying to get used to it!
View attachment 40

 

[darksl1d3]

I originally wanted a Glacier Blue TB but after seeing the Black with the blacked out badges I was in love.