Njwood1
New member
Mickey Thompson Baja Boss AT’s .. photos aren’t uploading from my phone but I’ll add before/after in the morning
2024 - Leveling Front
- Thread starter RideHigh24
- Start date
Njwood1
New member
Mickey Thompson Baja Boss AT
Attachments
RideHigh24
Member
Awesome!! No issues on full turn?
So sorry, not sure what I did there! was on my phone and did not mean to reply
Njwood1
New member
None at all .. I’ll post some close ups of control arm and wheel clearance
jerm1777
Member
Awesome! That would be appreciated. I'd like to get this kit ordered soon.
Njwood1
New member
Here they are at full turn. Didn’t need to delete or cut anything.
Attachments
jerm1777
Member
Nice! How much clearance do you have between the tire and the UCA?
Njwood1
New member
It clears.. but BARELY. I’m actually going to add the smallest spacer available just to give it a little extra wiggle room.. 1/3” or 3/8” for peace of mind it won’t ever rub
I went with on the front Bilstein 6112s set at the top notch that put me 1.2'' above stock height and Bilstein 5160 on the rear, also change to the Bilstein UCAs , the ride is amazingly smooth. The wheels are ION Alloy 20X10 with -19 offset and tires are 33 X 12.5 BFG K02.
Attachments
Njwood1
New member
I added a .25” spacer. Much better. Everything clears great now. Perfect setup.
jerm1777
Member
Just curious where you found the spacers at? I was looking for thin spacers like that and mostly everything I found was for aftermarket wheels.
Transient
Well-known member
Google is your friend
www.titanwheelaccessories.com
www.roughcountry.com
1/4 Inch Wheel Spacers for Cadillac Chevy GMC Trucks SUV Van | 6x5.5 | Titan Wheel Accessories
Upgrade your Chevy GMC 1500 vehicle with our 1/4 Inch 6x5.5 (6x139.7) wheel spacers. Improve stance, handling & stability. Long lasting durability with easy installation.
www.titanwheelaccessories.com
0.25 Inch Wheel Spacers | 6x135/6x5.5 | Multiple Makes & Models (Chevy/Ford/GMC/Ram)
0.25 Inch Wheel Spacers | 6x135/6x5.5 | Multiple Makes & Models (Chevy/Ford/GMC/Ram)
RideHigh24
Member
Still haven't pulled the trigger yet. I think I'm going with the RL, 2" SST lift. Raise the front and the back and be close to level. Gonna wait until I bring in for that first rotation and let tire shop install. Running the 285/65/20 on stocks clear the UCAs so hopefully with new control arms they'll still be clearance. The body lines on the truck are throwing me off on pics. I can tell it's perfectly level when I see a pic but looks high in front with lines. Oh, well.
TrailBoss Forum Favs 👍
Featured images
Featured images
