What did you do to your Trailboss today? 🛠️

[Jrskarma]

Underseat Storage for 7 bucks
mortar tubs from Home Depot, cheap cheap
View attachment 1849Pre fit on drivers side..
View attachment 1851

needs a little trimming, took off 3” with a carbide saw…
View attachment 1852

cut it down the long way and drilled a couple holes for zip ties and presto ...
for the Pass. Side I will repeat the process but cut the tub down the short side View attachment 1853

Good deal - that beats $130 Husky ones for sure.

 

[Jrskarma]

Well I just finished with a paint correction and graphene ceramic coating application, installed push buttons for garage door and future led lights in the grille. Swapped to a Flowmaster knock off muffler with flapper removed and rear resonators sealed. Blacked out tail lights and 3rd brake light.. Next project is adding wireless charging to center console

For your paint correct, did you clay, paint seal, iron remove, IPA then graphing? Like for an older car? I’m ready to and figured just clay then ceramic coat.

 

[BigBadChevyMN]

I wanted them on all the time so I used a fuse in the box that has power when the truck is running. I think its labeled ignition. I used a fuse tap. The red wire leads to the fuse I used View attachment 1812

I have tried 2 different types of fuse taps that I found locally and they were still to big. What size are these fuses they seem so tiny. Micro micro2

 

[Jmzvet]

I have tried 2 different types of fuse taps that I found locally and they were still to big. What size are these fuses they seem so tiny. Micro micro2

Micro2 blade fuse tap on Amazon. Thats where I got mine.

 

[BigBadChevyMN]

Micro2 blade fuse tap on Amazon. Thats where I got mine.

I was lucky and found out a different autozone in the area actually carried this size and I picked it up yesterday! Got my 3 amber lights (Raptor lights) wired and looking great!

I appreciate the follow up.

 

[tommysf13]

Swapped out the chrome exhaust tips with gloss black powder coated ones.

I don't know how anyone can do this mod without removing the bumper steps.

View attachment 1527View attachment 1528

I used matte black and only found 1 guy that did it without the step removal. I tried to do it without removal but had to in the end. Pain in the rear but worth it over the chrome !

 

[TexasBoss]

Tell us about your modifications, upgrades, repairs and customizations!

New to this forum. Or any forum for that matter.
Did a final fit of my DIY bed rack today. Cost less than $100

 

[07blackz71]

After having my Amp Research steps on for 6 months, I finally added a set of led lights to illuminate the steps when the door is open.

I didn't like the blue leds that came with the Amp steps ,so I didn't install them. I found a set of LUX lighting lights that have a pure white color and they have a magnetic mount.

 

[Jmzvet]

After having my Amp Research steps on for 6 months, I finally added a set of led lights to illuminate the steps when the door is open.

I didn't like the blue leds that came with the Amp steps ,so I didn't install them. I found a set of LUX lighting lights that have a pure white color and they have a magnetic mount.

Lets see some photos

 

[07blackz71]

Lets see some photos

Here is a few.

 

[Jmzvet]

Nice. You’ll never step in a puddle again

 

[teamfreddy]

The AMP steps are great. Had them on my Ram and should be ordering some soon for the TB as I hate the fixed running boards as they make the truck visually look lower than it actually is.

 

[BigBadChevyMN]

Yes it is a GM mirror. Part #13581082 Bought it used for $70 on ebay

this mirror replacement is just plug and play correct?

 

[07blackz71]

this mirror replacement is just plug and play correct?

Correct!!

 

[DIRTBILLY]

Added AMP Research power side steps, UPR catch can, Pulsar LT tuner, tinted front windows, AVS lighted hood protector, wireless phone charger, automatic fog lights turn on with parking lights, all lights on when high beams on mod, hard retractable tonneau cover, LED reverse and license plate bulbs.