What did you do to your Trailboss today? 🛠️

[PHXPHOTOG]

Where did you get the Z71 fender badge ?

This was the link but it now says unavailable. There are others. Even though the link says OEM it is not real. It is a cheap imitation. For something like this that is going to stay on the truck I think I would go genuine OEM next time.

Amazon.com: 1PC Z71 OEM Badge 3D Emblems Replacement for 2019-2021 1500 2500 3500 Decal Badge 84632695 Nameplate (Matte Black) : Office Products

Amazon.com: 1PC Z71 OEM Badge 3D Emblems Replacement for 2019-2021 1500 2500 3500 Decal Badge 84632695 Nameplate (Matte Black) : Office Products

www.amazon.com

 

[PistolsFiring]

Where did you get the Z71 fender badge ?

I did the OEM from Chevy accessories site. I think like 85 dollars plus tax for both fender badges and the small Z71 front grill badge.

 

[theUSAchevy]

Installed the AVS AeroSkin hood protector today. Fits perfect. Looks good
Only gripe is the small raised stick on AVS emblem. I peeled it off but AVS is etched into the plastic surfaceView attachment 4175View attachment 4174View attachment 4173

Is that yellow tint on the fogs or aftermarket lights?

 

[Jmzvet]

Is that yellow tint on the fogs or aftermarket lights?

It’s Lamin-X film lens cover.

 

[polarisnchevy]

I added door sill protectors from a company called Red Hound.
They are USA made and are very nice quality, super sticky and very thick.

Do you have a link or product number?

 

[redman733]

Do you have a link or product number?

I must had misread something when I said they were made in USA, it's just a USA seller.
Either way they are made well, very thick, and adhere VERY WELL.

https://www.amazon.com/dp/B086VR5LWN?tag=trailboss00-20

 

[Honda kid]

New BFG ko2 tires and rims.

 

[TGomez]

It’s been raining out in So Cal every weekend for the past month and a half or so. Something that we’re not used to and yesterday finally I had a chance to work on my 2019 TB . Yesterday I installed 1.75 Bora adapters to make room for 35-12.5r18 Toyo open country Trail that I will be mounting on to the stock wheels. The reason I added the 1.75 adapters in to give the tires some room with the UCA . I have a 2.0 SST kit from Ready Lift. And since I was already there, I did some trimming to clear some room for the tires so that they won’t rub when turning. Trimmed the front inner wheel well liner and took off bracket and trimmed the back mud flap hopefully this all helps. I will be posting pictures shortly right after I get tires installed hopefully next weekend.

 

[mlakey130]

Was going to install the GoRhino D6 running boards, but the brackets didn't arrive as they are in a separate box... But did break a sweat putting new Chevy bed mat in...

 

[PHXPHOTOG]

Was going to install the GoRhino D6 running boards, but the brackets didn't arrive as they are in a separate box... But did break a sweat putting new Chevy bed mat in...View attachment 5347View attachment 5348

Good call on the Dominator D6. I am on my second set of them. I dont really fault the product. I am super hard on them. The inside rail is the slider. They have protected my rocker panels very well even though I have smashed them up. If your going to rock crawl try and come down on the inside rail. The outside step tube can not support the weight of the truck and will bend.

Steve

 

[mlakey130]

Good call on the Dominator D6. I am on my second set of them. I dont really fault the product. I am super hard on them. The inside rail is the slider. They have protected my rocker panels very well even though I have smashed them up. If your going to rock crawl try and come down on the inside rail. The outside step tube can not support the weight of the truck and will bend.

Steve

View attachment 5349View attachment 5350

This happened first time out on trail. So research on here led me to the D6. Like your set up... Red!

 

[Jmzvet]

That will buff right out

 

[2032Ceta]

One of the few things I dislike about my TrailBoss is the front passenger seat height. So, this weekend I will be installing a seat lift kit that raises that seat up. I ordered it from a gentleman on eBay who has a company called Seat Solutions. As soon as I ordered he called to ask me if I had any questions, and wanted to thank me for purchasing. One of the best customer service experiences I have ever had. If you're looking to do the mod, I would recommend looking him up.. He even has an installation video on youtube. This will be one of many laundry list items I want to do to my truck to dial it in the way I like it..

I installed the kit about a month after purchasing the truck. Makes a big difference for a wife that is 5 foot 3 inches tall. It is a well made kit and looks good. I have to agree on the customer service...guy was great.

 

[Jmzvet]

Any photos?

 

[jwflores]

Got my MX4 installed this morning…pocket caps should be here today
View attachment 2064

Looks nice, how is this cover working out for you? I have looked and this is most popular model. What are the plus and minus of this cover.
Thanks for your input.