What did you do to your Trailboss today? 🛠️

[Woodzyzewski]

Had my truck for a little over 2 months. It’s a 2024 LT Trail Boss 3.0L.

What I’ve done so far:

• 285/75 18 Wildpeak AT4W’s
• 1.75” RL Level
• Rough Country Fold Up Tonneau
• Line-X Premium Black Bed Liner
• Front Window Tint with Windshield Visor
• Lamin-X Headlight tint and protectant
• Duramax Diesel door badges from Etsy
• Ronin Factory 8” stubby antenna

 

[Fiveoh]

How is the control arm clearance with those tires? I have the same leveling kit and really want to put those size tires on. Also using the factory rims, and really don’t want to use spacers.

 

[Woodzyzewski]

How is the control arm clearance with those tires? I have the same leveling kit and really want to put those size tires on. Also using the factory rims, and really don’t want to use spacers.

Haven’t rubbed yet but she’s close. Pics are at full lock.

 

[Grey]

They aren't technically ON the truck yet, but I took the time today to coat them with the same graphene that I used on the rest of the truck. I'll give it some time to cure overnight.

Dumb question while I wait. since this is my first set of aftermarket wheels, maybe I had higher expectations for ease of fitment. I see that there is a universal bolt pattern on the back, but I struggled to test fit one on the studs for 20 minutes before I gave up. its possible that I was just giving a half hearted effort. its 95* outside, and the tires are easily over 100lbs a piece, but what is the trick to get these to slide over the studs? The bolt holes in the wheel are about 1/8" smaller than OEM and it is missing by that much it seems....

 

[Stormin08]

post a link to what you bought, there are a few 6 lug patterns....

 

[GETGONE]

GM bolt pattern is 6x5.5" or 139.7MM

 

[Grey]

post a link to what you bought, there are a few 6 lug patterns....

purchased from Custom Offsets via phone. the link on the site gives a dropdown to choose the bolt pattern, but I confirmed over the phone 6*139.7.

https://www.customwheeloffset.com/buy-wheel-offset/4P06-20100-6D55-18BBT/4play-4p06-20x10-18

screenshot from the order is ambiguous, it lists both options so im a bit confused.

 

[JWright82]

Had my truck for a little over 2 months. It’s a 2024 LT Trail Boss 3.0L.

What I’ve done so far:

• 285/75 18 Wildpeak AT4W’s
• 1.75” RL Level
• Rough Country Fold Up Tonneau
• Line-X Premium Black Bed Liner
• Front Window Tint with Windshield Visor
• Lamin-X Headlight tint and protectant
• Duramax Diesel door badges from Etsy
• Ronin Factory 8” stubby antenna

Great looking truck sir. I’ve never thought about the lamin-x headlight tint but your application looks great. Did it noticeably impact perceived headlight brightness?

 

[Woodzyzewski]

Great looking truck sir. I’ve never thought about the lamin-x headlight tint but your application looks great. Did it noticeably impact perceived headlight brightness?

It did a little bit, but not drastically. I just view it as a fair trade off for aesthetics. Sort of like a little bit of loss of MPGs with my 35s lol

 

[07blackz71]

purchased from Custom Offsets via phone. the link on the site gives a dropdown to choose the bolt pattern, but I confirmed over the phone 6*139.7.

https://www.customwheeloffset.com/buy-wheel-offset/4P06-20100-6D55-18BBT/4play-4p06-20x10-18

screenshot from the order is ambiguous, it lists both options so im a bit confused.
View attachment 9305

I bet the center cap is over the GM pattern and exposing the ford pattern. Remove the center cap and try the other holes.

 

[Grey]

I bet the center cap is over the GM pattern and exposing the ford pattern. Remove the center cap and try the other holes.

That was it. you can barely tell the difference between the two patterns and one of the wheels just needed the cap rotated. many thanks.

mounted them today. ill get better pics later, but overall very happy. still needs a bit more mud flap trimming on the passenger side, but almost no rub so far. and best part, the duratrac hum is GONE.

 

[baron]

That was it. you can barely tell the difference between the two patterns and one of the wheels just needed the cap rotated. many thanks.

mounted them today. ill get better pics later, but overall very happy. still needs a bit more mud flap trimming on the passenger side, but almost no rub so far. and best part, the duratrac hum is GONE.


View attachment 9307View attachment 9308

Duratrac hum is THE worst. Can't wait to replace mine.

 

[Ryanj5049]

Tell us about your modifications, upgrades, repairs and customizations!

Mostly stock '19 Custom from work. Recently got Readylift 1.75" level. Otherwise just a stubby aerial, mudflap delete front and rear, headache rack and center console from eBay. Got stiffed on shitty tires when purchased last September. Need some stubby A/T's!!

 

[Ryanj5049]

Stub antenna
Window tint
Low max tonneau cover
Amp research power step
Clear coat bra on the front
Blacked out emblems and lettering

are those black out badges replacement badges or just black covers?

 

[Dtay0421]

100% truth and yes it is a 10mm

100000% I did these without a flex head a month ago and my hands still hurt from jamming them in there