What did you do to your Trailboss today? 🛠️

[Bowtiefreak]

I added LED grille marker lights. Low-profile and can't tell they are there when they are off. 3M tape attached, no drill.

View attachment 25390

They look good. I know I've liked mine.

 

[Chuckle Head]

Today was adding Red MGP caliper covers and swapping out those chrome lug nuts with Black! Could not have been easier.

 

[BigBlackie_'25TB]

Below are my current tunes I have flashed after having HP Tuners unlock my ECM and TCM. I am currently doing careful adjustments and logging.

ECM
DFM disabled
Auto Stop/Start disabled
Cooling Fan Settings lowered
Power Enrichment ratio changed
Driver Demand settings configured
High Octane Spark Table adjusted
Spark Timing Strategy
Engine Torque Management
Tire Revs Per Mile (Speedometer Calibration)~SPEEDO

TCM
Desired Shift Time (Power)
Shift Scheduling
Base Line Pressure
Initial Transition Time
Power Upshift Torque Reduction
Upshift Intervention Type
Torque Limit Threshold
Downshift Torque Limit Threshold
Transmission Line Pressure Strategy
Street/Performance Shift Calibration
Tire Revs Per Mile (Speedometer Calibration)~SPEEDO

Torque Converter (TCC)
Speed Normal Apply
Speed Normal Release
Full Throttle Apply
Full Throttle Release
TCC Slip RPM
TCC Lockup Strategy
Torque Converter Lockup Optimization

 

[X-BoatCop]

Ordered the Official GM recommended Dash Camera. (GM Part #19540254) Have over 32,000 GM Rewards Points, so it's only costing me Tax & Shipping, about $36. Once it gets here, and I've scoured the instruction sheet, I'll decide if I want to install it myself, or have my Chevy Dealer do it. I'm kinda sensitive about tearing out the interior of a brand new truck to run wires, myself. Even with the labor charges, I'll still come out ahead. If the dealer screws something up, it'll get fixed. If I screw something up, I'm fucked. I'll provide feedback, after I get it in.

If anyone has already done this, please let me know what I'm in for.

 

[Tboss]

Changed out the factory tires for 295/60/20 Bridgestone all-terrain R03’s. Added a 1.75 readylift leveling kit and swapped out the chrome lugs for black. Also added red rough country caliper covers. The new tires and stance are so sexy. Best $3000 I’ve spent in a long time.

 

[NY3Wulf]

Changed out the factory tires for 295/60/20 Bridgestone all-terrain R03’s. Added a 1.75 readylift leveling kit and swapped out the chrome lugs for black. Also added red rough country caliper covers. The new tires and stance are so sexy. Best $3000 I’ve spent in a long time.

stunning. Especially with the caliper covers. Those look just like BFG AT KO3s to me

 

[Tboss]

stunning. Especially with the caliper covers. Those look just like BFG AT KO3s to me

Thank you. You sir are correct about the tires. Guess I should proof read my replies. I love the look. I stressed out about which tire I should go with, but I could not be happier with the KO3’s.

 

[Stormin08]

has anyone notice the howl the BFG has after about 15K miles ???

seriously curious...i really wanted to return to liking the BFG...but 2 sets now with 20K miles have howled so badly...they were removed and replaced.

And that is our company Fleet Manager making those calls...to my surprise, my truck was returned with Toyo AT 3's

 

[Texas Cooper]

Ordered the Official GM recommended Dash Camera. (GM Part #19540254) Have over 32,000 GM Rewards Points, so it's only costing me Tax & Shipping, about $36. Once it gets here, and I've scoured the instruction sheet, I'll decide if I want to install it myself, or have my Chevy Dealer do it. I'm kinda sensitive about tearing out the interior of a brand new truck to run wires, myself. Even with the labor charges, I'll still come out ahead. If the dealer screws something up, it'll get fixed. If I screw something up, I'm fucked. I'll provide feedback, after I get it in.

If anyone has already done this, please let me know what I'm in for.

View attachment 25415

I too used the points program and had this one installed. My last dash cam was a Red Tiger in a Tahoe and loved it. This was before syncing with the app to view videos and events. Now with this Stinger in my 24 TB that should show clips I cannot get it to sync anything with the app, and the time of shared video on the 256 mem card are sketchy at best. I have been back to the parts dept at the dealership a couple times and still does not work with the app. According to Stinger, OPSIS is the company, support they gave me a list to follow which I did, still nothing. They did however reveal that the cam Chevy gave me is an older model of the owners manual that came with the cam. I also worked with onstar and they led me through locating OPSIS on my networks list on my iPhone, three more steps and it worked. Until the next start up. Hope you have better luck with yours? I'll replace it soon with another Red Tiger. Good luck!

 

[Slagiatt]

has anyone notice the howl the BFG has after about 15K miles ???

seriously curious...i really wanted to return to liking the BFG...but 2 sets now with 20K miles have howled so badly...they were removed and replaced.

And that is our company Fleet Manager making those calls...to my surprise, my truck was returned with Toyo AT 3's

Happened to me too. Tires started cupping at low milage, would howl around the 50mph range. Replaced with general grabber atx and theyve been great going on 5 years. When i bought a second trail boss that only had <14k miles i just immediately replaced the crap factory tires.

 

[BigBlackie_'25TB]

Today, changed my oil and dumped out and cleaned my catch can. I have an extension piece attached. But, as you can see, I still had some room in the regular size can (excluding the extension piece) after 5400+ miles.

 

[Murph76]

Today, changed my oil and dumped out and cleaned my catch can. I have an extension piece attached. But, as you can see, I still had some room in the regular size can (excluding the extension piece) after 5400+ miles.

Is this on a regular tb or the 3.0 diesel tb

 

[BigBlackie_'25TB]

Is this on a regular tb or the 3.0 diesel tb

Regular gas TB

 

[Stormin08]

i can typically drain about 3 oz of fluid from my can....same setup as you, extension as all

 

[BigBlackie_'25TB]

i can typically drain about 3 oz of fluid from my can....same setup as you, extension as all

I am seriously astounded how much crap "could" go back into the intake manifold without these catch cans. Crazy!