What's new

What did you do to your Trailboss today? 🛠️

3m ceramic tint and rb20 slim steps. Next is rough country tonneau cover this weekend of all goes well.
 

Attachments

  • IMG_0953.webp
    IMG_0953.webp
    261.4 KB · Views: 83
So, I have a 2019 Trail Boss LT and when I look at the AVS Lightshield or Lightshield PRO it says will not fit Z92 or Trail Boss versions. But people here seem to have Lightshields on their TBs so what is the verdict? Do they work without modification?
 
They will work on your year. They won't work on the 22+ Refresh trucks because the hoods changed.
 
Got a bit done this weekend. Added some fender flares and a bed liner.
View attachment 9191
I need to paint the flares. But I can't afford it just yet. Luckily these are bolt on so I can pull them off and get them painted. I'm thinking gloss black like the hood cowling.

View attachment 9192
I picked a drop in liner over a spray in. My last truck had a spray in and had several permanent dents through the liner. I'm hoping this will prevent that from looks

Got a bit done this weekend. Added some fender flares and a bed liner.
View attachment 9191
I need to paint the flares. But I can't afford it just yet. Luckily these are bolt on so I can pull them off and get them painted. I'm thinking gloss black like the hood cowling.

View attachment 9192
I picked a drop in liner over a spray in. My last truck had a spray in and had several permanent dents through the liner. I'm hoping this will prevent that from happening.
Looks good! What flares are those? Thanks!!
 
It was really nice today and I installed my VSE Fuel System Saver, dual fuel filter.

Well, I've had the truck for about 10 weeks now.

So far I've installed a Rough Country electric steps, Stillen cold air intake scoop, full BedRug bed liner, Lund hard folding bed cover, tailgate seal kit, dual bed cargo nets, Multiflex tailgate step lights, bed stake pocket covers, cross member frame plugs, 9 custom bed tie down anchors on bed front and sides, Auto Vent front bug shield, full enclosed rear seat storage, WeatherTech window shades/deflectors, Gator mud flaps, and some smaller items on the inside.
 
Are those dual bed cargo nets the GM ones? If so, where do they mount? I saw them on ebay but can't find where they actually go.
 
Are those dual bed cargo nets the GM ones? If so, where do they mount? I saw them on ebay but can't find where they actually go.

No, I didn't buy the GM nets due to what you get for the cost. A friend of mine has one of the GM brand net. Basically the only difference is the sewn in bag at the one end, which I think is worthless. I looked at numerous net on Amazon and order two from them. They were inexpensive, look good, function well, and do what I need them to do. I put one in the front and one in the rear of the bed.

This is the one I purchased: https://www.amazon.com/dp/B08ZMR4Y7H?ref=ppx_yo2ov_dt_b_product_details&th=1

Here are a few Photographs.

Tom.
 

Attachments

  • IMG_3914.webp
    IMG_3914.webp
    474.6 KB · Views: 83
  • IMG_3908.webp
    IMG_3908.webp
    614.4 KB · Views: 83
  • IMG_3907.webp
    IMG_3907.webp
    749 KB · Views: 85
Yeah, I have the GM one. I bought it using my leftover GM points. The elastic ended up breaking after a few months of using it to put groceries in. I bought a cheapo one and not overly thrilled with it. What I'm interested in are different GM nets that I think go along the bed sides. There's a version for the 5'8" bed and one for the 6'6" bed. It includes two nets for the short bed and 4 for the long bed.

Does the Bedrug have anything that goes over the inner multiflex gate piece? Been thinking about getting just the floor piece for mine since I have the factory spray in liner.
 
Yeah those side nets and molle grids never interested me, but, to each their own. I put extra tie downs on each side.

What you see in the above photograph, #3 is what you get on the tailgate. No carpet piece on the dropdown part. I'm going to a carpet shop and match up the material and have a piece made.

I don't know why they don't supply a piece to go on the dropdown part. The only thing that I can come up with is that maybe that piece may fall off when the gate is dropped down, it's only held down by Velcro tape. :unsure:

Tom.
 
I was thinking of having my local Line-X guy black out my chrome tips on the exhaust..I asked him about it and believe it or not he had no experience with that sort of mod..Surely I am not the only one who had this idea...? Anyone black out their exhaust tips.?? If so how..?
I just painted mine with some heat paint, they turned out great.
 

Attachments

  • IMG_1280.webp
    IMG_1280.webp
    346.2 KB · Views: 41
Back
Top